Please fill out the form below to have a West Physics representative contact you to arrange for a service or product quote for your facility.
Our address and telephone numbers are:
3825 Paces Walk SE
Atlanta, GA 30339
770-435-9186 • 1-866-275-WEST (9378) • FAX 770-599-2333
Office Hours: West Physics maintains liberal office hours for the convenience of our customers nationwide.
9AM – 8PM Eastern Time
8AM – 7PM Central Time
7AM – 6PM Mountain Time
6AM – 5PM Pacific Time
Closed Weekends & U.S. National Holidays
Dr. West has an extensive amount of experience in a broad range of medical and health physics areas. After service with both the Department of Energy and the U.S. Nuclear Regulatory Commission in a variety of technical and regulatory roles, Dr. West spent several years in private practice with Phoenix Technology Corporation as a Senior Medical Physicist and Director of MRI Operations. Dr. West now operates West Physics, helping clients with their physics needs throughout the United States. Among his activities and accomplishments, Dr. West has been the recipient of the NRC’s Special Act Award and the University of Michigan College of Engineering’s Outstanding Recent Alumni Award; has participated in U.S. nuclear diplomatic negotiations at the International Atomic Energy Agency in Vienna, Austria; has delivered the keynote address to the National Conference of Radiation Control Program Directors; has presented numerous seminars on diagnostic imaging quality assurance and radiation dose reduction; and is the holder of a United States Patent.
In addition to his many other responsibilities, Dr. West has served as an advisor to the Joint Commission on image quality and radiation safety issues, most recently providing technical advice related to the 2015 Joint Commission Imaging Standards changes. Dr. West also serves on the Standards Committee for RadSite, a CMS-approved imaging accreditation body; as a member of the AAPM Professional Survey Subcommittee; as a member of the AHRA Education Foundation Steering Committee; and on the External Advisory Board of the University of Michigan’s School of Nuclear Engineering and Radiological Sciences (currently the top-ranked graduate nuclear engineering program in the U.S.).
Dr. West serves as Adjunct Professor of Nuclear Engineering and Radiological Sciences at the University of Michigan, teaching Medical Imaging Physics.
Dr. West is originally from Atlanta, Georgia.
West, W.G., Kearfott, K.J., and Seow, C.Y., “Investigation of Optically Stimulated Luminescence and Signal Fading Properties of Several Materials”, Health Phys., vol. 112 no. 6, pp. 560-577, June 2017.
West, W.G., “CT Dose Optimization and its Global Impact on Stakeholders”, Hlthc. Bus. News, pp. 84-88, Sept. 2016
Kearfott, K. J., West, W. G., “An Affordable Optically Stimulated Luminescent Dosimeter Reader Utilizing Multiple Excitation Wavelengths”, Appl. Radiat. Isot., vol. 104, pp. 87-99, 2015.
Kearfott, K.J., West, W.G., Rafique, M., “The optically stimulated luminescence (OSL) properties of LIF:Mg,Tl, Li2B4O7:Cu, CaSO4:Tm, and CaF2:Mn thermoluminescent (TL) materials”, Appl. Radiat. Isot., vol. 99, pp. 155-161, May 2015.
West, W.G., “How to Create a World Class Dose Reduction Program”, Radiol. Mgmt., pp. 39-41, Sep/Oct 2014.
West, W.G., “Preparing for (and Surviving) an ACR On-Site Accreditation Inspection”, Radiol. Mgmt., pp. 12-13, Nov/Dec 2011.
West, W.G., Kearfott, K.J., and Bernal, S.M., “The Sunlight OSL Response of a-Al2O3:C”, Rad. Prot. Dosim., vol. 119 no. 1-4, pp. 344-349, April 2006.
West, W.G., Kalchik, A.F., et. al., “An Affordable Optically Stimulated Luminescent Dosimeter Reader”, Health Physics Society, 2005.
Bell, Z.W., West, W.G., et. al., “Monte Carlo Analysis of a Mercuric Iodide Neutron/Gamma Detector”, Trans. on Nucl. Sci., 2005 (in review).
Bell, Z.W., Carpenter, D.A., et. al., “Neutron Detection with Cryogenics and Semiconductors”, Phys. Stat. Sol. (C), vol. 2 no. 5, pp. 1592-1605, 2005.
McDonald, J.T., West, W.G., and Kearfott, K.J., “An Evaluation of the Kearny Fallout Meter (KFM), a Radiation Detector Constructed from Commonly Available Household Materials”, Oper. Rad. Safety, vol. 87 no. 5, pp. S52-S57, November 2004.
West, W.G., Kearfott, K.J., and Bernal, S.M., “The Sunlight OSL Response of a-Al2O3:C”, Rad. Prot. Dosim., 2004 (in review).
Gunnett, R.B., Kearfott, K.J., et. al., “Simple Design of a Moving Mechanical Collimator for Varying Exposure of Thermoluminescent Dosimeters (TLDs) over a 15-Day Period”, Health Physics Society, 2003.
West, W.G. and Kearfott, K.J., “An Analysis of the Current State of MRI Quality Assurance Regulation in the United States and the Effect of the Increasing Regulatory Burden on the Health Care Industry” Proceedings of the 48th Annual Meeting of the Health Physics Society, 2003.
“One Year After the JC Imaging Standards Changes – What Have We Learned and What’s Coming Next?” – 2016 AHRA Annual Meeting (Nashville, TN) – August 1-3, 2016
“The New Joint Commission Imaging Requirements – How to Ensure Your Facility is Ready” – GE Healthcare Educational Webinar – May 7, 2014.
“The New Joint Commission Imaging Requirements – How to Ensure That Your Facility is Ready” – AHRA 2014 Spring Conference (San Antonio, TX) – April 24, 2014.
“What Can We Learn From Ten Years and 2,000 ACR MRI Physics Surveys? The top five reasons why MRI units fail, and how to avoid failures at your facility” – GE Healthcare Educational Webinar – September 11, 2013.
“Radiation Dose Reduction: Tying It All Together” – 2013 AHRA Annual Meeting (Minneapolis, MN) – July 28, 2013.
“Recent Changes to the ACR CT Accreditation Program and How to Implement Them” – GE Healthcare Educational Webinar – March 27, 2013.
“Optimal Ways to Prepare and Plan for ACR Accreditation” – GE Healthcare Educational Webinar – June 15, 2011.
“ACR and IAC Accreditation for MRI, CT and Nuclear Medicine” – 2010 RSNA Annual Meeting (Chicago, IL) – December 2, 2010.
“ACR and IAC Accreditation for MRI, CT and Nuclear Medicine” – 2010 AHRA Annual Meeting (Washington, D.C.) – August 22, 2010.
“ACR/ICAMRL High-Field MRI Inspection Preparation and Program Update” – Daytona Beach, FL – October 13, 2008.
“ACR CT Accreditation: Getting Started and Staying Accredited” – Eugene, OR – January 27, 2008.
“ACR MRI Inspection Preparation and Program Update” – Daytona Beach, FL – October 8, 2007.
“The ACR CT Accreditation Program: Getting and Staying Accredited” – Daytona Beach, FL – October 8, 2007.
“Medical Physics and the MiniCAT: Covering the Technical and Regulatory Needs of the MiniCAT Owner” – San Diego, CA – February, 2007.
“Mammography Technology Update – New Products & Technologies” – New Orleans, LA – June 2, 2006.
“ACR Accreditation Update – Are You Ready for an On-Site Inspection?” – Las Vegas, NV – May 24-26, 2006.
“ACR Accreditation Update – Unique Problems and Solutions for 3T Scanners” – Las Vegas, NV – May 24-26, 2006.
“ACR Accreditation Update – Recent Developments & Preparing for an ACR Inspection” – Atlanta, GA – March 18, 2006.
“ACR Quality Control – MRI Program Update and Refresher” – Charleston, SC – October 9, 2004.
“ACR MRI Quality Assurance and the Current State of the ACR MRI Accreditation Program” – Las Vegas, NV – September 3-5, 2003.
“The ACR CT Accreditation Program – An Overview” – Las Vegas, NV – September 3-5, 2003.
“Designing and Managing an ACR Quality Control Program for Your Open MR Facility” – Las Vegas, NV – April 8-10, 2003.
“Understanding, Implementing & Maintaining an ACR MRI Quality Control Program at Your Facility” – Eugene, OR – January 18, 2003.
“Implementing the New ACR MRI QA Program – A Seminar for Technologists and Program Directors” – Atlanta, GA – July 20, 2002.
“MRI ACR Quality Control Procedures for the Technologist” – Orlando, FL – June 29, 2002.
“Optimizing Magnetic Resonance Image Quality & MRI Quality Assurance Under the New ACR Guidelines” (w/ Dr. Perry Sprawls) – Atlanta, GA – January 12, 2002.